Why construction invoicing is different
Contractor invoicing software exists because construction billing doesn't fit a one-invoice-per-sale model. A plumber sends one invoice when the job's done. A builder bills a deposit, then progress as the work goes in, then every approved change, then the final, then the retainage held along the way, sometimes to a homeowner and sometimes to a lender. Generic invoicing apps make you work all that out in a spreadsheet and type it in.
Construction invoice software starts from the job instead. It knows the contract value, what's been billed, what change orders were signed and how far along each line is, so the invoice is a calculation, not a guess.
Who it's for
- Remodelers billing deposits, progress payments and change orders to homeowners
- Custom builders billing in stages tied to the schedule
- GCs on cost-plus or time-and-materials work who bill approved hours
- Small offices where the person invoicing also runs jobs
If you send fewer than a handful of invoices a month and each one is a single amount, QuickBooks on its own may be enough. Construction invoicing pays off once you're billing several jobs in stages.
Billing a lender or an owner on a formal schedule of values? That's a pay application. See pay applications, which share the same budget and change orders.
What to look for in construction invoicing software
- Deposit invoices as a percent or a fixed amount of the contract
- Progress invoices by percent complete, line by line, with what's already been billed
- Invoices tied to schedule milestones
- Change orders billed straight from the signed change order
- Retainage held on each invoice and released at closeout
- Status you can see: sent, viewed, partially paid, overdue, paid
- Automatic reminders, so you're not the one chasing
- A clean sync to your accounting system
Every kind of construction company invoice
| Invoice | Built from | Typical use |
|---|---|---|
| Deposit | A percent or fixed amount of the contract | Before work starts |
| Progress | Percent complete on each budget line and approved change order, minus what's been billed | Monthly or at stages |
| Milestone | A schedule task, as an amount or a percent of the contract | "Drywall complete", "cabinets set" |
| Change order | The signed change order's lines | Billing an extra on its own |
| Standard | Your own lines, or a percent of an estimate | Small jobs, T&M, one-offs |
| Final | What's left on the contract | At substantial completion |
| Retainage release | The retainage held on earlier invoices | At closeout |
Every invoice can carry tax and retainage. Once an invoice has a payment, its amounts lock: void it or invoice the difference, so the record stays clean. Every invoice on a job is listed with its status and balance, so you can see at a glance what's been billed, what's been paid and what's still out.
Progress billing without the spreadsheet
Open a progress invoice and you see each budget line and approved change order with its value, what's been billed so far and the last percent complete. Where a line is tied to a schedule task, the task's percent complete is suggested. Enter this period's percent and the invoice works out the amount, less retainage.
Because the lines come from the signed estimate and change orders, the total billed can't drift from the contract. See job costing and financials and change orders.
Time-and-materials and cost-plus invoicing
Crews clock in against cost codes, and hours tagged T&M become a ticket the client signs. When you invoice, the job's unbilled T&M hours show with their bill rates, so you bill what was approved and nothing twice. Void an invoice and its hours are released to bill again.
On cost-plus work, approved bills and timecards are already on job cost by cost code, so the backup for each invoice is a report away, not a shoebox of receipts. See construction time tracking.
What a construction invoice should include
Whatever tool you use, a contractor invoice that gets paid without a phone call has:
- The job name and address, an invoice number and a due date
- What's being billed: the stage, the percent complete or the change order number
- Contract value, billed to date and balance remaining
- Retainage held this period and in total, if any
- Approved change orders listed separately from the base contract
- How to pay, and who to call with questions
Invoices built from the job include these automatically, because the numbers already exist.
Sending, reminders and getting paid
Send the invoice by email or text. The client opens it on a private page with no login, and the status changes to viewed when they do. A friendly heads-up goes out a few days before the due date. Once it's past due, it's marked overdue and a reminder goes out weekly for a few weeks, so you're not the one making awkward calls.
Record payments as they come in, including partial payments by check or bank transfer, and the balance updates. Online card payment through Stripe works from a link on the invoice page once your company's payment account is connected; that setup is being rolled out, so ask us where it stands for your account before you count on it.
A contractor invoicing app that syncs to QuickBooks Online
On the Whole Job and Whole Company plans, connect QuickBooks Online and invoices, clients, vendors and bills go across, and paid status comes back. Keep QuickBooks for the company books; bill from the job. Export invoices and payments to CSV any time. See the invoices and payments guide.
Because it runs on any phone as an installable web app, you can send the deposit invoice from the driveway the day the proposal is signed.
From estimate to invoice without retyping
The signed estimate becomes the budget, and the budget lines are what progress invoices bill against. You can also create an invoice from an estimate directly, for its full value or a percent, which suits small jobs billed in one or two payments. Nothing gets copied from one spreadsheet to another, so the contractor invoicing software and the estimate never disagree.
Invoicing mistakes that slow down payment
- Billing a change order before it's signed, so the client disputes the whole invoice
- Progress percentages that don't match what the client can see on site
- Retainage forgotten at closeout, months after the job ended
- No due date, so the invoice sits in a pile
- Chasing late payments by memory instead of on a schedule
Construction invoicing software fixes most of these by building the invoice from signed records and running the reminders for you. The rest is sending the invoice the day the milestone is met.
A real job: billing a kitchen and bath remodel
- DepositThe proposal is signed. Create a deposit invoice for a percent of the contract and send it before you order cabinets.
- MilestoneRough-in passes inspection. Bill the milestone tied to that schedule task.
- Change orderThe homeowner signs a change order for under-cabinet lighting. Bill it straight from the change order, or roll it into the next progress invoice.
- ProgressMid-month, bill each budget line by percent complete. The invoice shows what's already been billed, so nothing is billed twice.
- ReminderThe progress invoice goes past due. The overdue reminder goes out on its own; the payment comes in by check and you record it.
- Final and retainageBill what's left on the contract, then release the retainage held along the way once the punch list is done.
Pricing
Invoicing is part of the money tools on Whole Job ($299/mo) and Whole Company ($499/mo), both per company with unlimited users and unlimited jobs. Field ($149/mo) covers scheduling, field and subs without the money tools. The 14-day trial includes invoicing with no card. Want a one-off invoice without signing up? Use the free change order form or the schedule of values template. See pricing.
Best contractor invoice app? It depends on the job
If you bill one invoice per job, a general invoicing app or QuickBooks alone is enough. If you bill deposits, progress, changes and retainage across several jobs, you want invoicing inside the job. as of November 2026, JobTread and Buildertrend both include invoicing and payments in their all-in-ones; JobTread publishes $199/mo with one internal user, and Buildertrend quotes after a demo. See all comparisons.
Common questions
What is contractor invoicing software?
Software that builds and sends invoices from a construction job's contract, schedule, change orders and hours, tracks what's been billed and paid, and chases late payments for you.
Can I bill progress payments by percent complete?
Yes. A progress invoice lists each budget line and approved change order with what's been billed and the last percent. Enter this period's percent and the amount, less retainage, is worked out.
Does it handle retainage?
Yes. Set a retainage percent on an invoice and it's held from the amount due. At closeout, a retainage invoice bills the total held on earlier invoices.
Does it sync with QuickBooks?
With QuickBooks Online, on the Whole Job and Whole Company plans: invoices, clients, vendors and bills go to QuickBooks and paid status comes back. QuickBooks Desktop isn't supported.
Can clients pay online?
Online card payment through Stripe is being rolled out to accounts. Until it's on for yours, record checks and bank transfers against the invoice and the balance updates.
Can I invoice from my phone?
Yes. It runs in any phone browser and installs on the home screen, so you can create and send a deposit or milestone invoice from the job site.
Do clients need an account to see an invoice?
No. They open it from a private link by email or text, with no login.
Is this the same as AIA-style pay applications?
No. Invoices are for homeowners and simple contracts. Pay applications bill a lender or owner against a schedule of values in the G702 / G703 layout, and they're a separate feature on the same budget.